Custom Windows and Doors

Custom window systems

Window scopes can include casement, fixed, awning, tilt-and-turn, horizontal sliding, and specialty configurations in thermal-break aluminum or aluminum-clad wood systems.

Custom exterior door systems

Door scopes can include hinged entry and French doors, sliding glass doors, lift-slide systems, and bi-fold door walls with project-specific panel layouts, sills, hardware, finishes, and glass.

Written specification coordination

Buildtana coordinates opening schedules, dimensions, operation, glass, finish, hardware, screens, performance criteria, shop drawings, production evidence, and delivery requirements before manufacturing release.

Managed quality control and logistics

The signed Smart Offer identifies the procurement scope. Buildtana then coordinates approvals, project-specific quality-control checkpoints, packaging, freight, delivery, and product support.

Thermal-break aluminum and aluminum-clad wood windows

Two frame families for contemporary performance packages and warmer wood-interior applications.

• Casement, fixed, awning, tilt-and-turn, and sliding configurations
• Custom dimensions, frame colors, glazing, screens, grids, and hardware where supported
• Operable and fixed combinations coordinated across architectural elevations

Important: Thermal, structural, water, air, impact, and certification values are model-, size-, glass-, anchoring-, installation-, and jurisdiction-specific. Confirm every required value in project documents.

Hinged, French, sliding, lift-slide, and bi-fold doors

Exterior door systems coordinated as building-envelope assemblies rather than decorative product images.

• Handing, swing, active leaf, panel layout, stack location, and track configuration
• Threshold, sill drainage, lock preparation, hardware, finish, and glass
• Opening verification, structural support, waterproofing interface, and service access

Important: Large multi-panel doors require field verification and installation planning. Product procurement does not replace the installing contractor's responsibility for code-compliant installation and waterproofing.

Project-specific performance packages

Glass, frame, hardware, and documentation are selected against the actual project criteria.

• Safety glass, Low-E coatings, insulated glass, sound or thermal targets where specified
• Design-pressure, impact-resistant, or Florida approval packages where available
• Approved shop drawings and written selections as the production reference

Important: Never infer approval or code compliance from a website description. The exact product, size, glass, anchoring, approval document, and installation must match the jurisdiction and opening schedule.

What types of custom windows does Buildtana supply?

Buildtana coordinates custom casement, fixed, awning, tilt-and-turn, horizontal sliding, and specialty window configurations. Available systems include thermal-break aluminum and aluminum-clad wood. Final configurations, sizes, glazing, hardware, screens, performance values, and certifications are confirmed in the project quote and approved shop drawings.

What types of exterior doors are available?

Door scopes can include hinged entry and French doors, sliding glass doors, lift-and-slide systems, and folding or bi-fold door walls. Buildtana coordinates frame material, panel layout, sill, handing, glass, hardware, finish, locking, and project-specific performance requirements before production.

Can windows and doors be ordered in custom sizes and colors?

Yes. Custom dimensions, frame colors, interior and exterior finish combinations, grids, glass makeups, hardware colors, and opening configurations can be reviewed. Availability depends on the selected system, engineering limits, finish process, quantity, and manufacturer confirmation.

Are impact-rated or hurricane window and door packages available?

Impact-resistant and Florida project packages may be available for specified systems. Do not assume a product is approved from a general description: the exact model, dimensions, glass, anchoring, design pressure, and current approval documentation must match the project jurisdiction and opening schedule.

How does Buildtana verify window and door specifications?

The team reviews the opening schedule, drawings, dimensions, operation, finishes, glazing, hardware, performance criteria, and delivery conditions. Approved shop drawings and written selections become the production reference. Project-specific requirements should never rely on a website image alone.

Does Buildtana install windows and doors?

Buildtana manages product procurement and can help coordinate installer introductions and installation requirements. The installing contractor remains responsible for field verification, rough openings, code-compliant installation, flashing, waterproofing, structural attachment, and local inspections unless a separate written scope states otherwise.

How are windows and doors priced and delivered?

Pricing depends on dimensions, quantity, frame system, glass, hardware, finish, certification, packaging, destination, and schedule. Buildtana can present indicative comparisons, but the signed Smart Offer controls. Where quoted DDP, the written offer separates the product and landed project economics and identifies the agreed delivery scope.